K BELL 01 by Kike Vila
Oscillator 1 timbre
Only sawtooth oscillators are enabled, resulting in a harmonically rich content.
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 144.
Tone for oscillator 2 is off.
Volume (VCA) volume
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is manually set to 63.
Oscillators ranges timbre
Oscillators 1 range is 4'.
Oscillators 2 range is 4'.
High-pass filter (HPF) timbre
High-pass filter cut-off frequency is manually set to 767.97Hz (202).
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 878.77Hz (122) and is modulated by Note Vel, VCF Env.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 125.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 128.
Note Num direct modulation amount for low-pass filter envelope amount is 201.
Filter resonance is statically set to 14% (37).
Performance triggering timbre
Envelope triggering mode is set to mono.
Oscillators are reset on keyboard presses.
FX routing & levels fx
FX mode is set to Send, and routing is
Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is off. Effect 4 level is off.
Vintage Room Reverb fx
not yet complete
Mod, Delay & Reverb fx
not yet complete
Mod Wheel modulator
Controls OSC 1 Mod Wheel > Pitch Mod Depth.
| function | type | destination | amount |
|---|---|---|---|
| pitch | menu | OSC 1 Mod Wheel > Pitch Mod Depth | 255 |
Pressure modulator
Controls OSC 1 Aftertouch > Pitch Mod Depth.
| function | type | destination | amount |
|---|---|---|---|
| pitch | menu | OSC 1 Aftertouch > Pitch Mod Depth | 245 |
Note Num modulator
Controls VCF Keyboard Tracking.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 201 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 125 |
| menu | VCF Envelope Velocity Sensitivity | 128 | |
| menu | VCA Envelope Velocity Sensitivity | 128 |
LFO 1 modulator
Controls OSC 1 Pulse Width Modulation Depth.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | OSC 1 Pulse Width Modulation Depth | 125 |
| name | value |
|---|---|
| LFO 1 Rate | 65.4Hz (255) |
| LFO 1 Delay / Fade | 0s (0) |
| LFO 1 Shape | Ramp Down |
| LFO 1 Key Sync | off |
| LFO 1 Arp Sync | off |
| LFO 1 Mono Mode | 0 |
| LFO 1 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 1.66s (164) |
| VCA Envelope Sustain Level | 7% (18) |
| VCA Envelope Release Time | 1.63s (162) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 127 |
| VCA Envelope Sustain Curve | 141 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 125 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 0s (0) |
| VCF Envelope Sustain Level | 29% (75) |
| VCF Envelope Release Time | 1.03s (121) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |